For your 2020 Ford E450 chassis motorhome using the Roadmaster Rear Anti-Sway Bar # RM-1139-147, the end link you're looking for is the Replacement End Link for Roadmaster Rear Anti-Sway Bars # RM32VR. view full answer...
The Gorilla-Lift Utility Trailer Tailgate Lift Assist w/ Cable # GL1 can be used with your 28 inch rails but like you said you may not get all the functionality out of it.
The bars have a weight capacity up to 300 pounds and have a fast, easy installation with included hardware. It has durable stainless steel cables.
I attached a review video link below. view full answer...
For your 2016 Ford E-450, you can absolutely use the:
-SumoSprings Solo Custom Helper Springs # SSF-106-47 in conjunction with your existing anti-sway bars and still notice a suspension enhancement.
These SumoSprings feature progressive load control, which means the more you load them the stiffer they are, and the lighter load you have, the softer they'll become.
With these springs having a 1,000-lbs capacity, you should notice a rather softer ride.
Additionally, for ride height, your... view full answer...
Your 2016 RV that is based on a Ford E-Series cutaway can use Tekonsha brake controller wiring adapter # 3034-P that you referenced. You can verify ahead of time by comparing the vehicle's connector to that for the 3034-P harness; a picture is linked for you. If your RV's plug matches this rectangular shape then you're good to go.
If on the other hand the plug has a more square shape then instead use # 3035-P.
The controller I recommend is the reliable and highly-rated Prodigy P2 # 90885.... view full answer...
If your Class C motorhome that's built on a Ford E-450 cutaway has a factory trailer connector at the rear then to install the Prodigy P3 Electric Brake Controller # 90195 you can use the adapter # 3034-P.
If the RV has a 7-way connector this is all you'll need. If the connector is a 4-way you'll also need # 37185 for the 7-way. You can mount it using the bracket # C57202.
If the RV does not already have a trailer connector at all you'll first need to add a 4-way like # C59496 and converting... view full answer...
I went ahead and checked out your LaSalle Bristol bathroom sink 156 and it appears that the:
-LaSalle Bristol Single Bowl RV Bathroom Sink # 34416156PPA you mention is the same product.
This sink measures 13-3/4" long x 10-3/8" wide x 6-3/4" deep, has an interior measurement of 11-1/2" long x 8-1/8" wide x 6" deep, and has a drain hole diameter of 1-1/8". view full answer...
For an RV built on the foundation of a Ford E-Series cutaway you can use the Tekonsha wiring adapter part # 3034-P to connect any Tekonsha brand trailer brake controller, such as the Primus IQ # TK90160 or any of the Prodigy Series, such as the P3 # 90195.
The port is usually located behind the access panel in the center of the dash. You can use a trim panel puller to carefully pry the panel out, then undo the locking tabs to remove the panel. The connector will be behind this panel. It... view full answer...
It sounds like you're looking for the Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar # RM-4139-125, which would fit on your 1-1/2" diameter Roadmaster rear anti-sway bar. These are definitely better than the factory bushings that are used and would be a good place to start. view full answer...
The MaxxFan Deluxe 7500 # MA00-07500K will fit your 2015 Thor Vegas 24.1 as long as it has a 14" x 14" opening, I did call MaxxFan to double check that information.
For your 2015 Thor Vegas 24.1 you will want the SumoSprings Solo Custom Helper Springs # SSF-106-40. view full answer...
You're better off with what came on your 2023 Forest River Sunseeker as the largest trailer hitch we offer for trailers is the Adjustable Width Trailer Hitch Receiver for RV # C13702 which has a maximum trailer weight capacity of 5,000-lbs, and has a maximum tongue weight capacity of 500-lbs.
Additionally, this trailer hitch will fit trailer's with a frame width of 18" to 52", has a 2" receiver opening, and includes the mounting hardware. view full answer...
When looking at your Solera Slideout Topper when looking at the right side, that is the" Drive" side and the "Idler" will be on the left. It sounds like you need the drive head, so you can use the Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC34FR. view full answer...
According to my contact at Tekonsha, the # 3034-P is indeed the correct brake controller harness for installing the # 90195 Tekonsha P3 Brake Controller in a 2018 Ford E450 Cutaway van chassis.
I suspect that the connector you've found is the incorrect one, which is why the # 3034-P isn't fitting for you.
The connector you're looking for is pinned to the back of the coin pocket/storage cubby above the radio as shown in the provided photos. I hope that will help you find the correct connector.
I'll... view full answer...
When it comes to installing a friction sway bar on your Flagstaff Microlite 26 foot trailer The Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch # 83660 will work for you. I recommend using two of them since you have a 26 foot trailer.
Using this bar will reduce trailer sway caused by winds, curving roads or sudden maneuvers. It also will let you adjust tension for the perfect amount of control and resistance. It installs and removes quickly and easily... view full answer...
By Auto-Chains, Roadmaster is referring to air-actuated tire chains that deploy from the bottom of the vehicle just inboard and in front of the rear wheels. The chain assembly consists of a central hub with multiple lengths of chain radiating out from the central hub. The chains deploy so they lay on the ground right in front of the tire, and will spin as they pass under the tire. It's pretty ingenious, actually. You can Google 'Automatic Tire Chains' and you'll see what I'm speaking of.... view full answer...
In my research, I've found that only the manual transmission equipped LX model of the 2020 Kia Soul can be flat towed but I'd highly recommend you confirm the flat towability of the LX manual transmission model with your Kia Dealer.
If you confirm that your vehicle can be flat towed, in addition to the towbar you already have, you'll need base plates, a wiring harness, safety cables, a braking system and possibly a high/low adapter.
For a base plate, I'd recommend the # RM-521643-5 along... view full answer...
Yes. According to Roadmaster, the # RM-1139-147 can be used on the Ford E-350 Cutaway models, as well as the E-450.
I've linked an installation video of this sway bar on a similar E-Series for you to have a look at and use as a reference if you're going to be installing it yourself. view full answer...
For your 2022 Ford E-450 Cutaway Chassis I recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 with a Tekonsha Plug-In Wiring Adapter # 22292. This installation will be a little more involved than the installation on your GMC as the plug in for the adapter is located near the top of the dash and not underneath the dash where it is more accessible. I have linked an installation video that was done on a 2020 chassis so you can see where the connector is located. Do understand... view full answer...
For your 2021 Ford E-450 Cutaway, choosing a wiring harness will depend on what brake controller you have, and if you have a factory towing package or not.
If you have a Tekonsha brake controller, like the Tekonsha Primus IQ Trailer Brake Controller # TK90160, you can use the Replacement Brake Control Plug # 20127.
If you don't have one already, you're going to need to add a 4-flat # A35W42B, and a 7-way # ETBC7. view full answer...
When installing air helper springs onto your 2023 Ford E-Series Cutaway I recommend the SumoSprings Maxim Custom Helper Springs # SSR-106-47-1. Using these springs will improve your control and will level your ride. The springs have an easy, bolt-on installation and have a weight capacity of 5,000 pounds. Using the SumoSprings will not increase your vehicle's weight-carrying capacity.
I linked an installation video of the SumoSprings being installed on a 2017 Ford E-Series Cutaway. The... view full answer...
Yes, a 2004 Jeep Liberty Sport 4WD can be flat towed. Only 4WD models of the Jeep Liberty can be flat towed behind your RV. The Jeep's transfer case must be put in neutral and the transmission must be placed in park for flat towing. There are no speed or distance restrictions when flat towing the Liberty. To flat tow a Jeep Liberty you will need:
Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521423-5. The direct-connect brackets are virtually invisible, easy to mount... view full answer...
Go To Results